Who it is for and where it is used
Large bone sagittal saw blades are the cutting blades used with a sagittal saw handpiece in large-bone orthopaedic surgery. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where large-bone cutting is part of everyday practice. They are used in joint replacement surgery, where a flat, controlled cut prepares the bone for an implant, in fracture surgery, where a large fragment has to be shaped or trimmed, and in revision work, where an earlier implant has to be removed and the bone re-cut. They are also used in spinal work and in veterinary orthopaedics for the same range of large-bone cutting tasks in animal bone. The sagittal motion, a short back-and-forth arc at the tip of the blade, cuts on the forward and return strokes and gives the surgeon a straight, even cut face with little sideways drift, which is what a flat implant seat needs. The range covers lengths from 20.0 to 100.0 mm and widths from 9.0 to 29.0 mm, so one family of blades can serve a wide spread of procedures, from short, narrow cuts in smaller bones to long, wide cuts across a large bone, instead of many separate blade systems.
Construction and specifications
ZHONGJIAN TECH large bone sagittal saw blades are precision-manufactured with a toothed cutting edge that stays sharp through a cut and with a flat, even blade body that runs true in the saw handpiece. Each blade is identified by its prefix, its length, its width, its material thickness and its cut thickness, so the right blade can be picked without ambiguity at the sterile field. Lengths run from 20.0 to 100.0 mm and widths from 9.0 to 29.0 mm. Material thickness runs from 0.64 to 1.50 mm and cut thickness, the width of the slot the blade leaves in the bone, runs from 0.80 to 1.82 mm. Prefixes are AL, BJ, AJ, EJ and FJ. The coupling code in the prefix is J, Stryker Large Bone Sagittal, for the BJ, AJ, EJ and FJ prefixes. The catalog does not state a coupling for AL-prefix blades — please confirm before ordering. Tooth types A to F are available; the catalog does not publish a tooth-pitch table, so please confirm the tooth type required when ordering. Some blades in this range carry a printed depth scale with 10 mm marks, so the surgeon can read the depth of the cut from the blade itself while working. Examples from the range are AL10020110, 20.0 x 9.6 mm with a cut thickness of 1.10 mm; AL30060100, 59.5 x 29.5 mm with a cut thickness of 1.00 mm; BJ17034182, 34.0 x 16.5 mm with a material thickness of 1.24 mm and a cut thickness of 1.82 mm; and FJ25100127, 100.0 x 25.0 mm with a material thickness of 1.27 mm and a cut thickness of 1.27 mm.
Part-number matrix — by tooth type
| Tooth type | Part number | Length (L) | Width (W) | Thickness | Cut |
| A | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| B | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| C | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| D | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| E | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| F | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
Family size range
| Length (L) | Width (W) | Thickness | Cut |
| 20–100 mm | 9–29 mm | 0.64–1.50 mm | 0.80–1.82 mm |
Coupling codes: A–W (16 codes; there is no code L, Y, or Z). The catalog publishes no tooth-pitch table and no per-tooth-type part-number list for this family.
Example: sagittal blades cut on the forward stroke; confirm the exact part number and tooth type before ordering.
How to order
To order, quote the complete part number from the range, for example AL10020110, AL30060100, BJ17034182 or FJ25100127. First choose the length that reaches the cutting depth with enough blade outside the bone for handling, remembering that some blades carry a printed depth scale with 10 mm marks. Then choose the width that suits the cut: narrow blades for tight or short cuts and wider blades for long, straight cuts. Then check the material thickness and the cut thickness, since the cut thickness sets the width of the slot left in the bone, and confirm the tooth type required, from types A to F. Then confirm the coupling: J, Stryker Large Bone Sagittal, for the BJ, AJ, EJ and FJ prefixes. For AL-prefix blades, the catalog does not state a coupling — please confirm before ordering. Quote the complete part number when placing an order with ZHONGJIAN TECH, and state the quantity required. Blades are supplied in the lengths, widths, material thicknesses and cut thicknesses listed above, so please order from the published range and check the part number against the length, width, material thickness and cut thickness tables before confirming.