Who it is for and where it is used
Small bone oscillating and sagittal blades are the small cutting blades used with an oscillating or sagittal saw handpiece in small-bone orthopaedic surgery. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where hand, foot and small-bone work is part of everyday practice. They are used in hand surgery, where a small, controlled cut shapes a finger or wrist bone, in foot surgery, where a small bone has to be cut or reshaped, and in small-bone fracture surgery, where a fragment has to be trimmed or an osteotomy made. They are also used in paediatric orthopaedics, where the bones are smaller, and in veterinary orthopaedics for the same range of small-bone cutting tasks in animal bone. The oscillating motion, a rapid side-to-side swing through a small arc, and the sagittal motion, a short back-and-forth arc at the tip, both cut with little sideways drift, which is what a small bone needs, since there is little room for error around a small fragment. The range covers lengths from 10.0 to 39.0 mm and widths from 5.5 to 16.5 mm, so one family of blades can serve a wide spread of small-bone procedures, from very short, narrow cuts to longer cuts across a larger small bone, instead of many separate blade systems.
Construction and specifications
ZHONGJIAN TECH small bone oscillating and sagittal blades are precision-manufactured with a toothed cutting edge that stays sharp through a cut and with a flat, even blade body that runs true in the saw handpiece. Each blade is identified by its prefix, its length, its width, its material thickness and its cut thickness, so the right blade can be picked without ambiguity at the sterile field. Lengths run from 10.0 to 39.0 mm and widths from 5.5 to 16.5 mm. Material thickness is 0.40 or 0.51 mm, and the BH prefix is 0.40 mm. Cut thickness, the width of the slot the blade leaves in the bone, is 0.40 or 0.51 mm, and the BH prefix is 0.60 mm. Prefixes are AH and BH. The coupling code in the prefix is H, Stryker Oscillating & Sagittal, which fits Stryker oscillating and sagittal saw handpieces. Tooth types A to F are available; the catalog does not publish a tooth-pitch table, so please confirm the tooth type required when ordering. Examples from the range are AH09010040, 10.0 x 9.0 mm with a material thickness of 0.40 mm and a cut thickness of 0.40 mm; AH06012051, 11.5 x 5.5 mm with a material thickness of 0.51 mm and a cut thickness of 0.51 mm; BH09025060, 25.0 x 9.0 mm with a cut thickness of 0.60 mm; and AH13039051, 39.0 x 13.0 mm with a material thickness of 0.51 mm and a cut thickness of 0.51 mm.
Part-number matrix — by tooth type
| Tooth type | Part number | Length (L) | Width (W) | Thickness | Cut |
| A | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| B | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| C | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| D | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| E | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| F | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
Family size range
| Length (L) | Width (W) | Thickness | Cut |
| 10–39 mm | Confirm before ordering | 0.40 mm / 0.51 mm | Confirm before ordering |
Coupling codes: A–W (16 codes; there is no code L, Y, or Z). The catalog publishes no tooth-pitch table and no per-tooth-type part-number list for this family. Confirm before ordering the exact part number and tooth type.
Example: small-bone oscillating and sagittal blades for fine work in tight spaces; confirm the exact part number and tooth type before ordering.
How to order
To order, quote the complete part number from the range, for example AH09010040, AH06012051, BH09025060 or AH13039051. First choose the length that reaches the cutting depth with enough blade outside the bone for handling. Then choose the width that suits the cut: narrower blades for tight or short cuts in a small bone and wider blades for longer, straighter cuts. Then check the material thickness and the cut thickness, since the cut thickness sets the width of the slot left in the bone, and confirm the tooth type required, from types A to F. Then confirm the coupling: H, Stryker Oscillating & Sagittal. Quote the complete part number when placing an order with ZHONGJIAN TECH, and state the quantity required. Blades are supplied in the lengths, widths, material thicknesses and cut thicknesses listed above, so please order from the published range and check the part number against the length, width, material thickness and cut thickness tables before confirming.